This power window kit ideal for an upgrade to a classic car or a custom street rod build. Pre-wired pigtails and wiring harness plug directly into switches and motors for easy, trouble-free installation. OEM style DPDT rocker switches with texturing on the down window side, make operation by touch simple and keep your eyes on the road. Switch bezels are included for a clean installation. This kit is for 12-volt applications only. ator cable to better fit your custom street rod or muscle car. Includes: Switches, Switch bezels, wiring and crossover kit. Use of our 40 amp relay is suggested.

  • Convert manual crank-up windows to modern power electric windows
  • Works for flat glass windows only
  • Kit for 2 doors
  • Fits many classic car and custom street rod applications
  • Includes modern OEM style DPDT switches and bezels, wiring, regulator and crossover kit
  • 12V operation only
  • Instructions included
  • Pre-wired pigtails and wiring harnesses

Power Windows for your Classic Ride

Stop being cranky! Update your old manual windows to modern power electric windows to our Universal 2-Door Electric Power Window Aftermarket Conversion kit. Fits all flat glass windows, and includes switches, switch bezels, wiring, regulator, crossover kit and detailed assembly instructions.

For Nearly All Flat Glass Applications

Our universal power window conversion kit will work for many classic car and many custom applications that use flat glass windows, but to make sure our kit will fit your vehicle, here are the important dimensions:

  • Glass must extend down into door minimum of this 1-1/2” for attachment to the regulator. If current glass is too short, new glass will need to be sourced at a local shop.
  • Tempered glass is highly recommended as it’s both safer and stronger than normal glass
  • 16” straight up and down travel
  • Must have a minimum of 1” clearance between glass and door to mount regulator
  • Tracks measure 20” long x 1-3/8” wide
  • Motor measures 5” wide x 6-1/4” long
  • Kit has overall depth of 2-3/8”
  • Recommended available depth in door cavity of 2-1/2”
  • Must have a minimum 7” below the glass when the window is at its lowest position

This power window kit ideal for an upgrade to a classic car or a custom street rod build. Pre-wired pigtails and wiring harness plug directly into switches and motors for easy, trouble-free installation. OEM style DPDT rocker switches with texturing on the down window side, make operation by touch simple and keep your eyes on the road. Switch bezels are included for a clean installation. This kit is for 12-volt applications only. ator cable to better fit your custom street rod or muscle car. Includes: Switches, Switch bezels, wiring and crossover kit. Use of our 40 amp relay is suggested.

  • Convert manual crank-up windows to modern power electric windows
  • Works for flat glass windows only
  • Kit for 2 doors
  • Fits many classic car and custom street rod applications
  • Includes modern OEM style DPDT switches and bezels, wiring, regulator and crossover kit
  • 12V operation only
  • Instructions included
  • Pre-wired pigtails and wiring harnesses

Power Windows for your Classic Ride

Stop being cranky! Update your old manual windows to modern power electric windows to our Universal 2-Door Electric Power Window Aftermarket Conversion kit. Fits all flat glass windows, and includes switches, switch bezels, wiring, regulator, crossover kit and detailed assembly instructions.

For Nearly All Flat Glass Applications

Our universal power window conversion kit will work for many classic car and many custom applications that use flat glass windows, but to make sure our kit will fit your vehicle, here are the important dimensions:

  • Glass must extend down into door minimum of this 1-1/2” for attachment to the regulator. If current glass is too short, new glass will need to be sourced at a local shop.
  • Tempered glass is highly recommended as it’s both safer and stronger than normal glass
  • 16” straight up and down travel
  • Must have a minimum of 1” clearance between glass and door to mount regulator
  • Tracks measure 20” long x 1-3/8” wide
  • Motor measures 5” wide x 6-1/4” long
  • Kit has overall depth of 2-3/8”
  • Recommended available depth in door cavity of 2-1/2”
  • Must have a minimum 7” below the glass when the window is at its lowest position

More From This Category